• Transmission & Access
  • infomation management
  • Cable and connectivity
  • test and mesurement
  • Telecom osp
  • Devices

Engineering Projects and Consultancy

This activity includes rolling out OFC with in the city limits (access) and for long distances connecting cities (backbone). The process involves the following activities:

OFC Route Planning

Right of Way (ROW) permissions and Civil works like excavation of trench, Laying of HDPE / GI ducts and drawing of nylon through the same to pull fiber.

Cable laying, Cable Blowing, Splicing, Jointing, Trench less ducting, In-building installations, Electrical works, FTH installations. Activities that are included in Typical Engineering Projects are Project Planning which includes developing the cost and resource loaded project plans for access network teams. Access networks can be Copper based access networks or fiber based access networks.


Activity also includes site surveys.

The major focus of this activity shall be to identify events, sequencing, restraints, and other project influencing factors such as work schedules to enforce a rigid control mechanism for achievement of project activities. Other activities under it includes Summary and detailed resource plans, schedule and cost coordination, client meeting and visits, and planning administration. Workforce is deployed on field for installation of FTTH and VDSL2 deployment scope of which includes Installation of Optical Distribution Frames, fiber distribution cabinets, distribution points and IP MSANs, laying and termination of feeder loops in exchange areas.

Above activity is carried out under supervisory staff with vast experience and a dedicated quality team who will be responsible for quality inspections, conducting end to end testing on FTTH and VDSL2 netowrks, verifying home-pass, diagnosing and troubleshooting and finding the area of fault. Field staff that is deployed over these network deployment activities are experienced in splicing activities that includes fusion splicing and outside plant (OSP) work.


Full Telecom Solution

We, as a Turnkey service provider undertake design, construction and implementation of the Telecommunication networks. The content of the service package is matched as per needs of the customer. The Turnkey Infrastructure Rollout Projects comprises of the following major activities:

A. Infrastructure Rollout

B. Project Planning and Management Services


The activities undertaken under the each are given below:


A. Infrastructure Rollout


1. Site Planning, Survey & Design

The Site Planning includes Site surveys and detailed Construction and Installation planning of equipment including detailed drawings. We ensure that the Construction and Installation Documents are in accordance with the local laws and customer specifications. We have to prepare site folders for the client / telecom service provider which consists of the Site Specific Documents. The purpose of site folder is to assist construction and installation groups to execute the work. We carry out Soil test, stability certification, layout, structural and detailed design of the works. Designs are prepared by qualified designers who are either engineers or professionals.


2. Infrastructure development

We execute Infrastructure activities which includes site preparation, arrangement of temporary power, water etc., and civil & electric works including foundations for Tower, shelter, DG, cable feed troughs, cable entry glands, internal and external trays, Supply and installation of antenna mounting support.


3. Vendor Management

We follow up with suppliers which come under our direct scope as well as suppliers of the customer i.e., items like DG sets, Shelters, Air conditioners, Power plants, Batteries, Stabiliser with Isolation transformer, Towers, Civil and Electrical Works.


4. Acceptance Testing Certification (AT)

We undertake execution as well as coordination of infrastructure Acceptance Testing (AT) till receiving the AT Certificate from Telecom service provider. We rectify all the punch list points in our area of working and re-offer sites for AT.


5. BTS (Base Transceiver Station)

Activities BTS is radio equipment installed at site to send and receive mobile communication.

(i) BTS Installation & Commissioning BTS Installation activities are carried out according to site specific installation plan and includes:


Installation and termination of radio feeder cables, antennas and grounding kits

Installation of BTS (or extension rack), plug-in units and all internal cables

Installation of transmission cable, power cable and power system, Grounding cable and alarm cable for BTS

Load BTS software and set up needed parameters


(ii) BTS Integration We support in the integration according to Telecom Equipment manufacturer integration procedures and quality documentation. Integration is directed to:


Integrate the BTS to Base Station Controller (BSC)

General check up of software package.

Test calls for every time slot

Test external alarms and do any other required tests by the Operator

Realignment of antennas during optimization


6. Transmission Implementation

In order for communication between the BTS and the BSC, there is a requirement for Microwave (MW) Installations as a transmission medium. Following activities are carried out by us to implement microwaves:

Installation of MW antenna and outdoor unit

Installation of indoor unit modem & MW feeder

Commissioning of MW link and Alignment of antennas to obtain surveyed receive level

Integration of MW link


7. Quality Control

Quality control of the work undertaken by us is very important for our growth. We perform random quality audits and inspections in order to ensure the Implementation. Works are delivered in accordance with the quality standards laid down by the clients. We also follow-up and the monitor the corrective actions based on the findings of the quality audits.

We manage and monitor all aspects of project documentation as defined under “Share of Responsibilities”.


8. Risk Management

We monitor the project activities, identify risks associated with these activities, and advise the customer how they might affect the cost or schedule of the project, as well as to take all necessary measures to minimize such risks. Our Project management participates and contributes in monthly risk management meetings with the customer.


9. Logistics

We monitor and manage all activities relating to the movement and status of Supplier Product inventory in the project. We monitor related logistics management of the Equipment, which includes interfacing with the customers’ and suppliers’ logistics in order to schedule and reconcile the delivery of Equipment.


10. Operations & Maintenance and Warranty Support

We also undertake Operation & Maintenance (O&M) and Warranty support as a part of scope and services as stipulated in the contracts. Time Schedule for Roll out of a Tower site

The process of rolling out a tower site is of 45-60 days approximately depending on Ground Base Tower (GBT) or a Roof Top Tower (RTT) as detailed below:

• • •



B. Project Planning & Management Services

This model is usually adopted by Operators having an existing and established vendor base for civil and electrical works apart from Equipment Suppliers. They use this model to overcome the difficulties in bundling the same together due to a shortage of efficient Program management resources at their end. Our Program Management expertise is most typically used under such circumstances. Also, adopted by certain Telecom Equipment Manufacturer serving a Managed Services Deal with the Operators where Project Management is a part of scope, which is then outsourced back to back to us.

Salient scope includes:

We undertake supervision of Works and ensure timely completion. All planning and overheads associated with the subcontracted works are our sole responsibility. Project Management include following activities:

Planning and execution of network rollout through multi-skilled teams.

Single point interface to Telecom Equipment manufacturer

Implementing the activities as per the scope of subcontracted works and providing periodical Progress Report to the client

Quality Audit of sites with Telecom Equipment manufacturer and completion of suggested corrective actions.



Telecom Network Infrastructure Roll out Process

Telecom Network Infrastructure Roll out in India involves three major entities i.e., Telecom Operator, Telecom Equipment Manufacturer and Telecom Infrastructure service providers. The process starts with Telecom operator floating tender for the network roll out in a particular circle or region inviting quotes from Telecom equipment Manufacturer.

This is followed by the submission of the technical bids by the vendors. The quotes from vendors not only include the cost of the equipments but also the installation, commissioning and maintenance of the equipments. The vendors come up with their quote only after receiving pre bids from Telecom Infrastructure service providers and other suppliers.

Once the technical bids are qualified by the Telecom Operators, Equipment vendors further send Request for Quotes (RFQ) to Telecom infrastructure service providers like us for the installation, commissioning and maintenance of their equipments.

The RFQ's are also sent to the suppliers of the supplementary infrastructure equipments such as Towers, Antennas, and DG sets, Cables etc. The final quotes are submitted by the equipment manufacturers to the Telecom Operators. Once the contract has been awarded to equipment manufacturer, they further award the work to the Telecom Infrastructure service providers like us and other suppliers depending upon their bids.

Testing And Mesurement

Asides being a part of Turnkey Roll out Services, Telecom Equipment Network Implementation & Commissioning Solutions standalone is one of the revenue earning segment. It includes all the activities needed to make a base station or transmission site operational and to function as a part of a telecommunication network. We have a wide experience of our association with over 15000 Telecom Installations. We have the experience to work on broad variety of equipments which include GSM900/1800 & CDMA BTS equipment MSC Switching equipment, Optical (SDH/PDH) equipment and Broadband equipment, WIMAX. We have a hands-on experience on most of the manufacturer's equipment which includesAclatel Lucent, Ericsson, ZTE, Huawei and Ceragaon.


Telecom Implementation activities include:

Program Management & Project Planning

Radio Frequency (RF) / Micro wave (MW) site surveys

Installation and commissioning of antennas and antenna lines.

Installation, Commissioning and integration of base stations, microwave links and fixed transmission equipment.



Technical Support Services

We employ large pool of qualified engineers with adequate competence and experience in Telecom. We depute these trained personnel to provide technical support at the client site / offices as per their requirements. As on 30th September 2007, we had deputed over 150 personnel at client site.

The activity includes:

Project Management

BTS / BSC / MW Commissioning, Integration and O&M Activities.

RF & Transmission Engineering and optimization

MSC Installation & Power- Back up

Site Supervision » Optical Rollouts

Network Operation Centre (NOC) Operations Radio Network Optimization


Operations and Maintenance

We undertake Annual Maintenance Contracts (AMCs) for our clients in order to help them maintain their existing infrastructure. We are well equipped to provide Operation and Maintenance Support at the sites built by us for our clients as well as for those built by others. The revenues from AMCs are dependent on the number of sites, which in turn are set to increase with many operators announcing large scale expansion plans. We are well positioned to take advantage of the increasing AMC business on the back of our skilled man power and credibility with our clients.

Operations & Maintenance of Telecommunication Network can be briefly classified into two types:

A. Preventive maintenance Preventive maintenance is aimed at reducing the risk of faults and at maintaining the predetermined tolerance limits. Experience and statistics are used in order to judge how often the preventive work has to be done. A diagrammatic representation of preventive maintenance offered by us is shown below.

B. Corrective maintenance Corrective maintenance consists of activities for correcting any faults which occur. Faults may be, for example detected by alarms, complaints from customer or from checks during preventive maintenance work. Any faults met with are reported to the operating statistics system.

Information Management

Information Management Simidebis addresses to leading service provider networks in Nigeria and west Africa region by advanced solutions to address these trends by offering choices of connectivity solutions to help networks become more productive and profitable by providing a complete solution for Broadband, Mobile data networks and Value Added Services.

IP Traffic Managemen.

Fixed Line SMS & Voice SMS Solution.

PON Solution.

Service Delivery Platforms.

Location Based Services.

Roaming Solutions.

NMS Solutions.

Geographical Info Systems.

Anti-Spam Solutions.

Auto Configuration Server System

Cable & Connectivity

Simidebis provides complete solution for signal transmission products in the field of data, voice and video in telecommunications industries. Covering a wide range of complete end-toend products like Optical Fibre cables, Cabinets and Ethernet Switching, we have a major contribution in supplying complete range of products for FTTx and GPON.

Some of the components under our array of Fibre Optic Distribution System include:

Optical Fibre Cable - Ribbon, Loose Tube, Drop & Arial

Fibre Optical Panels

Optical Patch Cords and multi fibre cable assemblies

Media Converters

Interface Converters


Fibre Optic Fusion Splicers

Indoor and Outdoor cabinets

Testing And Mesurement

Radio Communication

Radio Communication test solution supports platforms covering 30 MHz to 2.7 GHz supporting key Tx
characteristics for LTE FDD/TDD, W-CDMA/HSPA/HSPA Evolution, CDMA2000 1X/1xEV-DO, TDSCDMA/


Radio Communication Service Test Set.

Radio Transmitter Test Set.

PMR/LMR/NXDN/P25 Test Solution.

Shield Box












Mobile and Wireless

Simidebis offers a wide selection of GSM/3G/LTE test solution addressing both mobile and base station test applications, Infrastructure Test: for infrastructure developers and 3G network operators, to assist them in debugging new network features, interoperability analysis, regression testing, network "stress" testing, acceptance testing, quality of service analysis, and network performance optimization, Wireless R&D and Conformance Test.
Let us help you find the right product for your 2.5G and 3G technology testing needs.
Conformance Test System

LTE Test System

Spectrum Analyzer

Signal Generators

Cable & Antenna Analyzer

Power Meter & Sensors

Digital Mobile Radio Test Set

Microwave Analyzer

Wi-Fi Test Solution

Telecom OSP

We recognize the importance of strategic partnerships with a selected number of companies in order to provide the expertise necessary to implement and support these range of solutions Our technological edge with the goal of delivering the best products – with the highest quality – every time. Our forefront outside plant applications include:

Complete FTTH-OND Solutions

Outdoor Fiber Distribution Hub (Cross Connect

 Fiber Distribution Frames and panels

 Wall-Mount Fiber Splitter Cum Distribution Box

 Wall-Mount Fiber Termination Box

 Fiber optic joint distribution frame and panel












PVC Ducts

 HDPE Sub Duct

 Micro-duct Solutions

 Warning and Protection Tiles

 Splice Closures & Accessories

 All types of Outdoor street Cabinets


We are Partner of:





Acatel Lucent MPR (Radio)

Acatel Lucent MPR (Radio)

Test and Messuring Equipment



Tool Box